Sunday, December 30, 2007

Steering Rack and Joint

Bit of a new old stock fan, proper AE trackrod ends.

From "trydaveforit" on ebay. Wash out the old grease in cellulose thinners and fill them again.

Tarted up my rack.
Always use these joints now, from a 2000 or 2500 saloon I think. Superstrong and tight, no rubber tatt.

Similar thing above.

RareBits4Classics also sells something similar.

With the 2000/2500 type you need to enlarge the turret hole the steering rack goes through a bit, but these other types will fit ok, but may require the rack to be giggled a bit side to side if the pinch bolt hits them.

No comments: