Tuesday, December 18, 2007


Fitted the throttle pedal and uprated the cable.
Cable outer has been replaced with some -3 braided hose :) Its basically the same as a linered cable. Smooth! Its like silk, I mean super smooth. See how long it lasts, filled it with chainlube. Should be fine. The bolt infront of the cable is to adjust the position of the accelerator when fully closed, so if you need to adjust the pedals to get a decent heel and toe its no bother...Also the pedal can be rotated 15degrees either side of upright by loosening the lower bolt on the bulkhead and moving it, again to get the best position, the hole has been ovaled slightly you see.
Thats the basic pedal setup...Same spacing as before etc.
Nice and simple and neat.

No comments: